2.3–21 GHz broadband and high linearity distributed low noise amplifier

This paper focuses on the design of a 2.3–21 GHz Distributed Low Noise Amplifier (LNA) with low noise figure (NF), high gain (S₂₁), and high linearity (IIP3) for broadband applications. This distributed amplifier (DA) includes S/C/X/Ku/K-band, which makes it very suitable for heterodyne receivers. The proposed DA uses a 0.18 μm GaAs pHEMT process (OMMIC ED02AH) in cascade architecture with lines adaptation and equalization of phase velocity techniques, to absorb their parasitic capacitances into the gate and drain transmission lines in order to achieve wide bandwidth and to enhance gain and linearity. The proposed broadband DA achieved an excellent gain in the flatness of 13.5 ± 0.2 dB, a low noise figure of 3.44 ± 1.12 dB, and a small group delay variation of ±19.721 ps over the range of 2.3–21 GHz. The input and output reflection coefficients S₁₁ and S₂₂ are less than −10 dB. The input compression point (P_1dB) and input third-order intercept point (IIP3) are −1.5 dBm and 11.5 dBm, respectively at 13 GHz. The dissipated power is 282 mW and the core layout size is 2.2 × 0.8 mm².     

Event-triggered variable horizon Supervisory Predictive control of hybrid power plants

The supervision of a hybrid power plant, including solar panels, a gas microturbine and a storage unit operating under varying solar power profiles is considered. The Economic Supervisory Predictive controller assigns the power references to the controlled subsystems of the hybrid cell using a financial criterion. A prediction of the renewable sources power is embedded into the supervisor. Results deteriorate when the solar power is unsteady, owing to the inaccuracy of the predictions for a long-range horizon of 10 s. The receding horizon is switched between an upper and a lower value according to the amplitude of the solar power trend. Theoretical results show the relevance of horizon switching, according to a tradeoff between performance and prediction accuracy. Experimental results, obtained in a Hardware In the Loop (HIL) framework, show the relevance of the variable horizon approach. Power amplifiers allow us to simulate virtual components, such as a gas microturbine, and to blend their powers with that of real devices (storage unit, real solar panels). In this case, fuel savings, reaching 15%, obtained under unsteady operating conditions lead to a better overall performance of the hybrid cell. The overall savings obtained in the experiments amount to 12%.     

采用信息增益率的混合入侵检测模型设计

针对现有混合入侵检测模型仅定性选取特征而导致检测精度较低的问题，同时为了充分结合误用检测模型和异常检测模型的优势，提出一种采用信息增益率的混合入侵检测模型.首先，利用信息增益率定量地选择特征子集，最大程度地保留样本信息；其次，采用余弦时变粒子群算法确定支持向量机参数构建误用检测模型，使其更好地平衡粒子在全局和局部的搜索能力，然后，选取灰狼算法确定单类支持向量机参数构建异常检测模型，以此来提高对最优参数的搜索效率和精细程度，综合提高混合入侵检测模型对攻击的检测效果；最后，通过两种数据集进行仿真实验，验证了所提混合入侵检测模型具有较好的检测性能.     

色散补偿及EDFA增益均衡的一体化

提出一种新的色散补偿及EDFA增益均衡的一体化方法。在10Gb／s的光通信系统和600km G652光纤中首次实现了基于16个碉啾光纤布拉格光栅(FBG)的色散补偿及掺饵光纤放大器(EDFA)的增益均衡。16个FBG的波长间隔为1．6nm，波长覆盖C波段1529～1556nm约27nm的范围。经600km G652光纤传输后，10Gb／s的NRZ码传输功率代价小于2dB。     

光纤参量放大器技术及其最新进展

介绍和论述了一种非常有实用前景的基于光纤非线性效应的光参量放大器(OPA)及其最新技术进展．最新发展揭示了它的很多技术特性优于传统的掺铒光纤放大器(EDFA)、半导体光放大器(SOA)和近年来很热门的光纤拉曼放大器(FRA)，如对信号的调制形式、比特率的完全透明性、相位共轭、超宽的增益带宽、很低的噪声指数和具备优异的全光波长转换功能．     

高保真电子管功放输出变压器的精确设计计算法

hi-end电子管功放音质优美绵厚,影响其音质的关键部件是输出变压器的电声性能,成为系统的喉舌。提出了一个新的方法,改变了以往粗略的估算法,使设计计算更合理﹑更科学﹑更实验化,成功解决了设计制造输出变压器的关键问题。     

全光网中的光信噪比估算与系统设计

指出了WDM光传送网中 ,级联光上下路节点或光交叉连接节点后 ,系统构成上与传统级联线路放大器情况下的差异以及常用光信噪比评估公式的近似性。对WDM光传送网中线路给出了一个等效模型 ,并详细推导了光信噪比的计算公式 ,同时计入了光放大器的自发辐射噪声引起的饱和效应。最后针对不同系统配置情况进行了光信噪比的估算 ,分析了估算结果及其对线路设计的指导意义     

CMOS光接收机主放大器设计

利用CMOS工艺设计一种用于SDH STM 4速率级(622 Mb/s)光纤用户网的光接收机放大电路。此电路由输入/输出缓冲、主放大单元、偏置补偿电路4部分组成。通过直接耦合技术提高增益,降低功耗;利用有源电感负载提高系统带宽。采用商用SmartSpice电路仿真软件和CSMC HJ 0.6μm工艺参数对该电路进行仿真。结果表明,该电路在5 V工作电压下中频增益为81 dB,3 dB带宽为470 MHz。     

采用RF2607的WLAN自动增益控制设计

介绍了宽动态变化范围的新型可变增益放大器RF2607的特性、功能,给出了利用RF2607设计无线局域网(WLAN)通信中自动增益控制部分的实用电路.     

5Gb/s 0.25μm CMOS限幅放大器

采用TSMC 0.25μm CMOS技术设计实现了高速低功耗光纤通信用限幅放大器.该放大器采用有源电感负载技术和放大器直接耦合技术以提高增益,拓展带宽,降低功耗并保持了良好的噪声性能.电路采用3.3V单电源供电,电路增益可达50dB,输入动态范围小于5mVpp,最高工作速率可达7Gb/s,均方根抖动小于0.03UI.此外核心电路功耗小于40mW,芯片面积仅为0.70mm×0.70mm.可满足2.5,3.125和5Gb/s三个速率级的光纤通信系统的要求.